Power Amplifiers

  • Electrocompaniet AW180

     360,000.00

    Specs

    All measurements are made at 120V / 240V //50Hz / 60Hz
    Amplifier section

    Output Impedance
    (20 Hz – 20 kHz) < 0,008 ohm RCA (single) input impedance 220 kohm XLR (balanced) input impedance 110 kohm Input sensivity for rated output 1 V Max. peak current > 100 A
    THD (measured at 1 kHz
    half power, 8 W) < 0,001 % THD (measured at 1 kHz -1 dB, 8 W) < 0,001 % Noise (measured with both inputs shorted) 400 Hz - 30 kHz : 90 µV 10 Hz - 30 kHz : 100 µV Rated output power 8 ohms 250 W 4 ohms 380 W 2 ohms 625 W Power consumption (no load or signal) 115 W Dimensions Width 215 mm / 8.5 inches Depth 470 mm / 18.5 inches Height 288 mm / 11.3 inches Weight 22 kg. / 48.4 lbs.

    Add to cart
  • Electrocompaniet AW250R

     595,000.00

    Specs

    All measurements are made at 120V / 240V //50Hz / 60Hz
    Amplifier section

    Output Impedance (20 Hz – 20 kHz) < 0,008 ohm XLR (balanced) input impedance 110 kohm Input sensitivity for rated output 1 V Max. peak current > 100 A
    THD (measured at 1 kHz
    half power, 8 W) < 0,001 % THD (measured at 1 kHz -1 dB, 8 W) < 0,001 % Noise (measured with both inputs shorted) 400 Hz - 30 kHz : 90 µV 10 Hz - 30 kHz : 100 µV Rated output power 8 ohms 2 x 250 W 4 ohms 2 x 380 W 2 ohms 2 x 625 W 1 ohms 2 x 1100 W Power consumption (no load or signal) 230 W Dimensions Width 483 mm / 19 inches Depth 450 mm / 17 inches Height 210 mm / 8.2 inches Weight 39 kg. / 85.8 lbs.

    Add to cart
  • Electrocompaniet AW400

     475,000.00

    Specs

    All measurements are made at 120V / 240V //50Hz / 60Hz
    Amplifier section

    Clipping point of the preamplifier is set to a level where total harmonic distortion (THD) is 0.2%
    Input Impedance (Fixed) 330 kohm
    Output Impedance (20 Hz-20kHz) < 0,01 Ohm Frequency response (DC - 65 kHz) - 3 dB Input level for rated output 1 V RMS Max. peak current > 150 A
    THD(measured at 1 kHzhalf power,8W) < 0,006 % THD (measured at 1 kHz -1 dB, 8 W) < 0,007 % Noise (measured with both inputs shorted) 400 Hz - 30 kHz : 130 µV DC - 30 kHz : 200 µV Rated output power 8 ohms 400 4 ohms 765 2 ohms 1010 Power consumption (no load or signal) 230 W Dimensions Width 358 mm / 14.1 inches Depth 470 mm / 18.5 inches Height 261 mm / 10.2 inches Weight 25 kg. / 55 lbs.

    Add to cart
  • Electrocompaniet AW600

     650,000.00

    Specs

    All measurements are made at 120V / 240V //50Hz / 60Hz

    Amplifier section

    Clipping point of the preamplifier is set to a level where total harmonic distortion (THD) is 0.2%
    Input Impedance (Fixed) 330 kohm
    Output Impedance (20 Hz-20kHz) < 0,009 Ohm Frequency response (DC - 65 kHz) - 0.4 dB Input level for rated output 1 V RMS Max. peak current > 150 A
    THD(measured at 1 kHzhalf power,8W) < 0,001 % THD (measured at 1 kHz -1 dB, 8 W) < 0,0015 % Noise (measured with bothinputsshorted) 400 Hz - 30 kHz : 150 µV DC - 30 kHz : 200 µV Damping factor (20 Hz - 20 kHz) > 850

    Rated output power

    8 ohms 600 W
    4 ohms 1200 W

    Power consumption (no load or signal) 230 W

    The NEMO is DC coupled from input to output

    Dimensions
    Width 465 mm / 18.3 inches
    Depth 450 mm / 17.7 inches
    Height 288 mm / 11.3 inches
    Weight 41 kg. / 90.2 lbs.

    Add to cart
  • KEF KASA 500

     79,000.00

    KASA 500

    DSP Controlled Dual power amplifier for Ci3160RLb-THX
    Amplifier power: 2x250W, Bridged 1x500W
    Cross over frequency: 40-140Hz
    Inputs: Line level RCA, LFE, Stereo speaker level
    Dimensions (HxWxD): 92x432x304 mm
    Weight: 4Kg

    Add to cart